1x Singclean® Antibody Rapid Test - (Blood)

Product detailed description

Test procedure

Allow test cassette, specimen, buffer and/or controls to equilibrate to room temperature (15-30°C) prior to
testing.
1. Remove the test cassette from the sealed foil pouch and use it as soon as possible. Best results will be
obtained if the assay is performed within one hour.
2. Place the test device on a clean and level surface.
For Serum or Plasma Specimens:
With the provided dropper, draw serum/plasma specimen and then add 1 drop serum/plasma specimen
into the sample well(S). Then add 2 drops of buffer to the sample well(S) immediately. Avoid air bubbles.
For Whole Blood Specimen:
With the provided dropper and transfer 1 drop of whole blood to the sample well(S) of the test device, then
add 2 drops of buffer to the sample well(S) immediately. Avoid air bubbles.
3. Wait for the colored line(s) to appear. The result should be read after 10 minutes. Do not interpret the
result after 20 minutes.

t

Operation instruction

correct use, convernient and quick

Interpretation results

Interpretation results:

NEGATIVE: If only the C band is present, the absence of any burgundy color in the both T bands (IgG and
IgM) indicates that no anti-COVID-19 antibodies are detected in the specimen. The result is negative.
IgM

POSITIVE:
In addition to the presence of C band, if only IgM band is developed, the test indicates for the presence
of IgM anti-COVID-19 in the specimen. The result is IgM anti-COVID-19 positive.
IgG

POSITIVE:
In addition to the presence of C band, if only IgG band is developed, the test indicates for the presence of
IgG anti-COVID-19 in the specimen. The result is IgG anti-COVID-19 positive.
IgG and IgM

POSITIVE:
In addition to the presence of C band, both IgG and IgM bands are developed, the test indicates for the
presence of both IgG and IgM anti-COVID-19 in the specimen. The result is IgG and IgM anti-COVID-19
positive.
INVALID:
Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques are the most
likely reasons for control line failure. Review the procedure and repeat the test with a new test cassette.
If the problem persists, discontinue using the test kit immediately and contact your local distributor.